The AUO G084SN05 V7 is an 8.4-inch LCD display panel manufactured by AU Optronics. Below is a summary of its specifications and installation considerations:
Specifications:
- Panel Brand: AUO
- Panel Model: G084SN05 V7
- Panel Type: a-Si TFT-LCD (Thin-Film Transistor Liquid Crystal Display)
- Panel Size: 8.4 inches
- Display Mode: TN (Twisted Nematic), Normally White, Transmissive
- Active Area: 170.4 × 127.8 mm
- Outline Dimensions: 203 × 142.5 mm
- Surface Coating: Antiglare, Hard coating (3H)
- Brightness: 450 cd/m² (Typical)
- Display Colors: 262K/16.2M (6-bit / 6-bit + FRC)
- Response Time: 20/10 ms (Typical) (Tr/Td)
- Refresh Frequency: 60Hz
- Backlight Type: 2 pieces of CCFL (Cold Cathode Fluorescent Lamp)
- Signal Interface: LVDS (Low Voltage Differential Signaling), 1 channel, 6/8-bit
- Input Voltage: 3.3V (Typical)
Installation Attentions:
- Ensure that the power is turned off when plugging in cables.
- During installation, keep the LCD screen smooth and avoid twisting it with external force.
- If the LCD module is dropped, it can lead to discoloration or stains on the display. Clean any drops immediately.
- Contaminants on the screen should be wiped using alcohol, cotton, or a soft cloth. If needed, you can blow away debris and then clean with a soft cloth.
- Handle the LCD module with care, as it is fragile and can easily break due to its glass construction.
- Avoid placing the LCD display directly under sunlight or exposing it to ultraviolet light, as this can degrade its performance.
- Note that visibility may vary with different viewing angles, so consider the viewing angle during installation.
- Extremely low temperatures can cause the liquid crystal in the display to crystallize. Conversely, temperatures above the upper limit can cause the liquid crystal to become an isotropic liquid, leading to irreversible changes.