Photo-relay operates from 1.6V for FPGA compatibility

Update: March 7, 2024 Tags:500vecoelicIsolationltrelaytoshiba

Called TLP3412SRLA, it draws 6.6mA at the nominal operating voltage of 1.8V.

Inside is a single Form-A (normally-open) ac or dc contact that can handle 48V, or 400mA continuously, or 1.2A pulsed.

On-state resistance is typically 1Ω and it switches on-off in 350 and 150μs respectively.

Isolation voltage is at least 500Vrms.

Operation is up to +125°C and packaging is 1.45 x 2 x 1.4mm S-VSON4.

“It is common to test semiconductors at elevated temperatures, and with photo-relays placed on the probe card they will be required to operate in high ambient temperatures,” said Toshiba.

Use is also foreseen in programmable logic controllers.

Find the TLP3412SRLA on this web page