All four devices were qualified to meet rigorous AEC-Q100 quality standards – a critical benchmark for semiconductor devices used within automotive applications.
Together, the foursome covers the most popular 
These components are derivatives of GRF’s recently released ¼ W PA family; the primary difference is these new cores have been subjected to an additional set of qualification tests and unique production screening protocols to warrant an AEC-Q100 Class 2 rating.
The GRF55xx-W series of PAs are ideal for 4G/5G cellular applications requiring exceptional native linearity over temperature extremes of -40°C to 105°C.
Each of these devices can deliver up to 23dBm of output power with better than -45dBc of ACLR performance – all without the aid of supplemental linearization schemes like digital pre-distortion (DPD).
The ability to beat the -45dBc ACLR performance metric without DPD is critical for meeting the stringent size, cost and power dissipation requirements of these cellular compensator/compenser applications.
The GRF2106W and GRF2133W also complement GRF’s existing portfolio of fully qualified AEC-Q100 LNAs.
The GRF2106W is rated to operate over the 2700 – 5000 MHz range with a nominal gain of 21.5 dB and a low NF of 0.8 dB.
A higher gain level of 28 dB is available with the GRF2133 providing an even lower NF of 0.6 dB over an operating band of 1800 – 5000MHz.
“Completing the qualification of these devices has been a critical step for Guerrilla RF as we continue to gain share within the automotive space,” says Jim Ahne, Guerrilla RF’s vice president of automotive and 5G products. “Together, these AEC-Q100 compliant devices extend the Company’s reach into the growing market for 5G cellular compensators associated with automotive shark fin antennas. Given the introduction of these new AEC-Q100 qualified PA and LNA cores, we’ve now formally released six of seven components tied directly to previously announced cellular compensator/compenser contract which will be ramping later this year.”
The GRF5507W and GRF5517W come in pin-compatible 3mm x 3mm, 16-pin QFN packages, with pricing starting at $1.54 (10,000-up, EXW USA).
The GRF2106W and GRF2133W utilize GRF’s smallest 1.5mm x 1.5mm, 6-pin DFN package, with pricing starting at $0.62 and $0.83, respectively (10,000-up, EXW USA).
Samples and evaluation boards are available for all four components.