LC260W01-A5K3: Superior Visuals from Any Angle with S-IPS Technology
LG Display LC260W01-A5K3: 26-inch S-IPS WXGA Display
High-Fidelity Visuals and Wide-Angle Clarity for Demanding Systems
The LC260W01-A5K3 is a 26.0-inch a-Si TFT-LCD module from LG Display, engineered around Super In-Plane Switching (S-IPS) technology. This panel delivers exceptional color fidelity and image consistency across ultra-wide viewing angles, making it a strong candidate for applications where off-axis readability is critical. By maintaining visual integrity from nearly any perspective, it addresses a key challenge for designers of public information displays and collaborative industrial interfaces.
- Core Specification: 1280×768 WXGA | 450 cd/m² Brightness | S-IPS Panel
- Key Advantages: Superior color stability across wide viewing angles, 72% NTSC color gamut for vivid image reproduction.
- Engineering Value: Reduces color distortion for off-axis viewers, provides a reliable platform for data-rich HMI.
Download the Official LC260W01-A5K3 Datasheet (PDF)
Technical Analysis: The S-IPS Advantage
The defining characteristic of the LC260W01-A5K3 is its Super-IPS (In-Plane Switching) display mode. Unlike conventional TN panels that can exhibit significant color and contrast shifts when viewed from an angle, S-IPS technology maintains color accuracy. The datasheet specifies a typical viewing angle of 89/89/89/89 degrees (L/R/U/D) at a contrast ratio of 10:1 or greater. This ensures that operators or viewers see consistent, reliable image data whether they are directly in front of the screen or off to the side, a crucial factor in control rooms and medical review stations. The panel’s performance is further supported by a 72% NTSC color gamut, enabling it to render a broad spectrum of saturated and accurate colors.
Effective thermal management is essential for display longevity. The panel’s power consumption for the logic board is specified at a typical 4.14W. Think of this specification like fuel efficiency in a car; a lower value indicates less energy is wasted as heat. This efficient operation, combined with the integrated CCFL backlight system rated for 50,000 hours, provides a durable foundation for systems requiring long operational lifetimes. For more detailed guidance, see our article on thermal management for industrial display reliability.
Optimized Application Scenarios
The specific performance characteristics of the LC260W01-A5K3 make it well-suited for several applications:
- Digital Signage & Information Kiosks: The 89-degree symmetrical viewing angle and 450-nit brightness ensure content is clearly visible to a wide audience in varied lighting conditions.
- Industrial Control Panels: Its large 26-inch diagonal and WXGA resolution provide ample space for displaying complex schematics and process data with clarity.
- Medical Imaging Carts: The S-IPS panel provides the color stability and wide-angle viewability required for collaborative review of diagnostic images.
- Broadcast & Video Editing Monitors: A 72% NTSC color gamut allows for more accurate color representation, which is critical in production environments.
This module is an optimal match for systems where visual accuracy and off-axis readability are the primary design drivers.
Key Specifications of the LC260W01-A5K3
| Panel & Optical Characteristics | |
|---|---|
| Screen Size | 26.0 inches |
| Resolution | 1280(RGB) × 768 (WXGA) |
| Display Technology | a-Si TFT-LCD, S-IPS, Normally Black |
| Brightness | 450 cd/m² (Typ.) |
| Contrast Ratio | 500:1 (Typ.) |
| Viewing Angle (L/R/U/D) | 89/89/89/89 (Typ.) (CR≥10) |
| Color Gamut | 72% NTSC (CIE1931) |
| Response Time | 7.5/8.5 ms (Typ.)(Tr/Td) |
| Surface Treatment | Antiglare, Hard coating (3H) |
| Electrical & Mechanical | |
| Signal Interface | LVDS (1 channel, 8-bit), 20-pin connector |
| Panel Supply Voltage | 12.0V (Typ.) |
| Backlight System | CCFL, 50,000 hours (Min.), includes inverter |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
Engineer’s FAQ
1. What is the primary benefit of the S-IPS technology in the LC260W01-A5K3?
The core benefit is superior image quality consistency. Its S-IPS panel ensures minimal color shift and maintains high contrast when viewed from off-center angles, up to 89 degrees in all directions as specified in the datasheet. This is critical for any application requiring accurate visuals for multiple viewers. For a deeper understanding of display technologies, explore our resources on LCD core technology.
2. What are the power supply requirements for this module?
The module requires a 12.0V (Typ.) power supply for the TFT-LCD panel logic. The datasheet also indicates that the CCFL backlight system comes with its own inverter, simplifying integration. Engineers must ensure their power source can meet the voltage and current requirements specified in the official documentation for both components.
3. How does the LVDS interface work on this panel?
The LC260W01-A5K3 utilizes a single-channel, 8-bit LVDS (Low-Voltage Differential Signaling) interface via a 20-pin connector. This is a standard interface for transmitting video data to the display’s timing controller (TCON). It uses differential pairs to reduce EMI, which is an advantage for system-level compliance. For more on this, read our guide to solving EMI issues in industrial displays.
4. What is the expected operational lifetime of the backlight?
The CCFL backlight is rated for a minimum of 50,000 hours of operation before its brightness degrades to 50% of the initial value. This long lifespan makes the display a reliable choice for industrial and commercial systems that operate for extended periods.
Enabling Visually Coherent System Design
The LC260W01-A5K3 offers a robust solution for large-format display needs where color fidelity and wide-angle performance are paramount. Its use of S-IPS technology provides a stable visual foundation, allowing engineers to build systems that deliver clear, accurate information to users regardless of their viewing position.